Here we list cnc control programming issues and notes.
- Fagor
- Fanuc
- GSK
Labels: Controller, Programming, Support
CNC New Inc. Manufacturer of Gang Tool Lathes
Wednesday, July 10, 2013
Programming Issues
This page is under construction
Here we list cnc control programming issues and notes.
Here we list cnc control programming issues and notes.
Posted by CNC New Inc.
0 Comments
Barfeed Issues
Posted by CNC New Inc.
0 Comments
Collet Closer Issues
This page is under construction
Here you will find a list of service issues in regards to collet closers with links to helpful information.
Here you will find a list of service issues in regards to collet closers with links to helpful information.
Labels: Collet Closer, Support
Posted by CNC New Inc.
0 Comments
Service and Maintenance
This page is under construction
Service and Maintenance issues, topics, and links.
Service and Maintenance issues, topics, and links.
- Maintenance description
- Maintenance schedule
- PM maintenance list
- Replacing lamp
- Spindle bearing replacement
- Jog switch
- Universal grease gun
- Operator and maintenance manual
Posted by CNC New Inc.
0 Comments
Installation Issues
This page is under construction
Here is a list of installation issues and links to support
Here is a list of installation issues and links to support
- Installing a spindle drive
- Setting up a gang tool lathe
Labels: Installation, Support
Posted by CNC New Inc.
0 Comments
Mechanical Issues
This page is under construction
There are many reasons and factors for Mechanical Issues. Here is a list of common problems and links to possible solutions.
There are many reasons and factors for Mechanical Issues. Here is a list of common problems and links to possible solutions.
- Checking the height of center
- Adjusting the height of center
- Installation issues
- Machining issues
- Mechanical issues
Labels: Mechanical, Support
Posted by CNC New Inc.
0 Comments
Spindle Drive Issues
This page is under construction
Here is a list of common spindle drive issues and solutions.
Here is a list of common spindle drive issues and solutions.
- Spindle drive - analog issues
- Spindle repair procedure
- C Axis drive
- Adjusting RPM
- Notes
Posted by CNC New Inc.
0 Comments
Control Issues
This page is under construction
Here you will find common questions and solutions to control issues.
Here you will find common questions and solutions to control issues.
- Locking up issues
- Ctrl-H / Ctrl-C test
- Updating the controller
- Motherboard issue
- DOS notes
- Off-Line issues
- Installing Hard Drive
- Password procedures
- Taking controls apart
- Spindle encoder troubleshooting
- Floppy to USB
- Diagnostic Console
- Math calculations
- File transfer
- Controller messages
Labels: Controller, Support
Posted by CNC New Inc.
0 Comments
Axis motor and amplifier issues
This page is under construction
There are many reasons and factors that go into having axis motor and amplifier issues. Here we list some common problems and solutions.
There are many reasons and factors that go into having axis motor and amplifier issues. Here we list some common problems and solutions.
- Tuning Amps
- Ctrl-H / Ctrl-C tests
- Axis Servo Errors
- Axis Motor and Amp Issues
- Motion Control Issues
- Axis Not Moving
- Axis Running Away
- Axis Not Repeating
- Axis always tripping thermal overload
- Axis always tripping axis amp.
Posted by CNC New Inc.
0 Comments
Machining Issues
This page is under construction
There are many reasons and factors as to why you are having Machining Issues. Here we list some of the most common reasons and some solutions.
There are many reasons and factors as to why you are having Machining Issues. Here we list some of the most common reasons and some solutions.
- Threading Problems
- Holding Size Problems
- Bad Finish Problems
Posted by CNC New Inc.
0 Comments
Service Manuals
This page is under construction.
Here we will have a list with links to service manuals
Here we will have a list with links to service manuals
Posted by CNC New Inc.
0 Comments
Technical Support
This page is under construction.
Here we will be listing frequently asked questions and technical support issues for the following:
Here we will be listing frequently asked questions and technical support issues for the following:
- Service Manuals
- Machining Issues
- Axis Motor & Amplifier Issues
- Control Issues
- Spindle Drive Issues
- Mechanical Issues
- Installation Issues
- Service and Maintenance
- Collet Closers
- Barfeed Issues
- Programming Issues
Labels: Support
Posted by CNC New Inc.
0 Comments